My Computer Advice Thread

wilde

Sinnear Member
Jun 4, 2003
3,041
48
48
Actually, there is. It's called Microsoft Office Student/Teacher Edition 2003. Not sure about activatiuon code but if I was a gambling man I would bet that you need one even for this edition.

You can buy it at London Drugs: http://www.londondrugs.com/Cultures/en-US/Product+Detail/Computers.htm?CatalogNavigationBreadCrumbs=Computers;Computers;Software;Educational;Microsoft%20Office%20Student/Teacher%202003&CS_Catalog=Computers&CS_RootCategory=Computers&CS_Category=Educational&CS_ProductID=1328665&ProductTab=1
 

exnilo

Banned
Feb 24, 2005
22
0
0
wilde said:
Actually, there is. It's called Microsoft Office Student/Teacher Edition 2003. Not sure about activatiuon code but if I was a gambling man I would bet that you need one even for this edition.

You can buy it at London Drugs: http://www.londondrugs.com/Cultures/en-US/Product+Detail/Computers.htm?CatalogNavigationBreadCrumbs=Computers;Computers;Software;Educational;Microsoft%20Office%20Student/Teacher%202003&CS_Catalog=Computers&CS_RootCategory=Computers&CS_Category=Educational&CS_ProductID=1328665&ProductTab=1

Sorry but you are talking about OFFICE. The poster was asking about Windows Media Centre Edition or MCE as its called.
 

wilde

Sinnear Member
Jun 4, 2003
3,041
48
48
exnilo said:
Sorry but you are talking about OFFICE. The poster was asking about Windows Media Centre Edition or MCE as its called.
My bad.

.
 

twoblues

New member
Apr 25, 2006
816
2
0
North Vancouver
It would seem counter-intuitive to have a Student edition of MCE considering that most MCE sales are as pre-installed OS's. Though, what you might have is a manufacturer copy of MCE that doesn't require activation. Basically, an image of the disk they use to install to their pc's before shipping. Somebody at the factory could have had sticky fingers.
 

exnilo

Banned
Feb 24, 2005
22
0
0
Hi Anita.

Well somethings to consider. Have you changed blank cd brands? Some new media may not be compatible. Have you recently installed or done some software updates or installs? Last thought may be that the drive has since gone bad. If you have not had the laptop serviced in awhile perhaps a repair install of windows would repair the problem. CD Problems can be hard to diagnose without actually being present to solve the problem. Happy to continue with the diagnosis if you can provide some more info. Thanks!
 

twoblues

New member
Apr 25, 2006
816
2
0
North Vancouver
Anita, this may sound like a horrible question, but are they actually CD-R's that you're burning? With the price of blank DVD's being less than CD-R's these days, I've run into a few people mistakenly buying the wrong type of media. Of course, this question is moot if your Mac doesn't have a dvd-burner.
 

exnilo

Banned
Feb 24, 2005
22
0
0
twoblues said:
It would seem counter-intuitive to have a Student edition of MCE considering that most MCE sales are as pre-installed OS's. Though, what you might have is a manufacturer copy of MCE that doesn't require activation. Basically, an image of the disk they use to install to their pc's before shipping. Somebody at the factory could have had sticky fingers.
MCE was first only sold to the system integrators like HP, Dell and so on. They since released it for system builders like myself in an OEM version. All versions require activation even ones installed by the integrators. There may have been some MSDN version that was made available to beta testers and the like. But really... just buy it. You pay for the great service of your ladies so pay for great software. lol
 

exnilo

Banned
Feb 24, 2005
22
0
0
Anita's Massage said:
twoblues,

It doesn't sound horrible:)

Yes, they are CD's. Interestingly, I can burn DVD's. At least I could a short while ago.
Perhaps what you are encountering is that the cd capacity is greater than what your burner is happy with. Could also be a cd speed rating issue but this is not really comon. More than likely its either the drive or windows being glitchy.

PS last thought.. also possible that the burning software that came with your machine is now out of date due to some Microsoft updates (they often break older software). Hope that helps!
 

jigga78

New member
Aug 12, 2005
13
18
3
wga workaround

twoblues said:
Well, considering you are so "Poor", guy, I'll let this illegality slip ;)

Not sure if there is a way to remove it, though you might try hunting through the seedy underbelly of Google. Otherwise, the easiest way is to reinstall the operating system using the disk they used originally. On the other hand, XP Home can be had for about $100 now-a-days and that might be worth the price to prevent the pain of running a pirated copy.
well there is a way to remove WGA from a pirated system......without formatting windows....theres also a way to do microsoft updates as well..msg me for details, too long to type out..
 

Juggy

New member
Feb 13, 2005
162
0
0
Not sure if this will help Anita, but certain media when used with my plextor 16x dvd burner required I update the firmware on the burner based on the speed of the disc. After updated works fine. Check for firmware updates on toshiba's site specifically for your series of labtops.
 

pooncrawler

Casual user
Apr 22, 2006
216
2
18
North Shore
bartendr and others: if you haven't solved your issues with Microsoft Update website yet try this:

go to START > Control Panel > Internet Options > Security

Highlight "Trusted Sites" and click on "Sites..." button.

Add the following: "update.microsoft.com" and "windowsupdate.microsoft.com"

Click "OK" all the way out of there.

Give it another try. :)

... All this assuming you are using IE for going there, BTW :confused:
 

bartendr

a friend to SP's
Jul 12, 2005
685
8
18
56
pooncrawler said:
bartendr and others: if you haven't solved your issues with Microsoft Update website yet try this:

go to START > Control Panel > Internet Options > Security

Highlight "Trusted Sites" and click on "Sites..." button.

Add the following: "update.microsoft.com" and "windowsupdate.microsoft.com"

Click "OK" all the way out of there.

Give it another try. :)

... All this assuming you are using IE for going there, BTW :confused:
Tried that..and again all it gives me is a white page when it says done. I do it through IE (7?) and that is the only reason I have IE on my comp is for updates, for all other browsing I use Firefox. If you or anyone has experienced this problem and knows how to solve it I would certainly appreiciate the help.
 

pooncrawler

Casual user
Apr 22, 2006
216
2
18
North Shore
alright then... another idea:

check your security software for "scripting control" of some sort, if you fail to find something like that, disable your security software and try Windows Update again. When you disable it you should get a "Security Warning" (unless you disabled this feature sometime before), but just ignore it for now.
Remember to enable it after you try again!
Let me know how it goes..
 

bartendr

a friend to SP's
Jul 12, 2005
685
8
18
56
Ok,heres the fucked up thing-if I try through Microsoft.com I get just a blank page. However if I try through Microsoft.ca, I can get to the Microsoft check screen(to see if I have Active X) but it seems to stall out there as well(it used to have a drop down line asking me to allow Active X) and does not begin to scan my computer. Any ideas any one?
 

exnilo

Banned
Feb 24, 2005
22
0
0
bartendr said:
Ok,heres the fucked up thing-if I try through Microsoft.com I get just a blank page. However if I try through Microsoft.ca, I can get to the Microsoft check screen(to see if I have Active X) but it seems to stall out there as well(it used to have a drop down line asking me to allow Active X) and does not begin to scan my computer. Any ideas any one?
Well one thing to look at would be your hosts file. Do a search for the file hosts and open it in notepad. The only entry in there should be 127.0.0.1. If there are websites listed take them out. Viruses often adjust the hosts file to prevent you from accessing security and update websites. Give that a shot :)
 

bartendr

a friend to SP's
Jul 12, 2005
685
8
18
56
How do I get to the hosts file?
Not completely understanding what to do here.
 
Last edited:

twoblues

New member
Apr 25, 2006
816
2
0
North Vancouver
the host file is usually found at:

C:\windows\system32\drivers\etc\

you'll see a file called 'hosts' which you need to open with notepad (right click the file -> open -> select notepad)

it should look like this:

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost


Now, this file is considered a hidden operating system file, so you'll need to enable the ability to actually view it.

My Computer -> Tools | Folder Options -> View (tab).

Make sure that the checkbox for "hide protected operating system files" is unchecked. Also select the radio button above it that says "Show hidden files and folders".
 

bartendr

a friend to SP's
Jul 12, 2005
685
8
18
56
found two such files,one as you said and the other is a hosts msn file.
both say the same thing,
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost
 

twoblues

New member
Apr 25, 2006
816
2
0
North Vancouver
Hmm..well, your host files seem good.

Some more advanced things to try. Open up your command prompt (Start -> run ->) and type 'cmd' and press enter.

On the command line type:

ping windowsupdate.microsoft.com

you should see something like this:

Pinging windowsupdate.microsoft.nsatc.net [207.46.225.221] with 32 bytes o

if not try typing:

ipconfig /flushdns

It could be that you have some false dns data. Basically, it is matching the wrong address to the right name.

If neither "ping" or "ipconfig" work, change your directory to the system32 directory:

cd c:\windows\system32

and retry.
 
Vancouver Escorts