Mm, if you're going on rails, don't forget locks so that you can set it and forget it. Nothing worse than a runaway blowjob bench.Concept sketch over lunch.
Mm, if you're going on rails, don't forget locks so that you can set it and forget it. Nothing worse than a runaway blowjob bench.Concept sketch over lunch.
ba-dum tss.LMAO
Point taken. I can include a removable lock pin at several locations so the angle of attack can be adjusted to the users .......
cumfort.
naughty nikki had one that she made herself and it had a mirror angled at the head of the table so you could watch her perform on you. It was an out of body experience
Having a duo using one of these table would be amazing. One SP work above massaging your back and one SP working below massaging you member.
? What a thought!!!
I would be concerned with the thickness of the table material. The unpadded Ikea table looks like 1 thick", the Amazon thickness lookes like 5" thick.Concept sketch over lunch.
The thickness of the table deck doesn't carry the weight. The legs and the rails carry the structural load. The thickness of the deck material is 3/4" fir plywood. Add 1" or so of dense foam and 1/2" of soft padding foam so your can wrap it over the edges and you have 2-1/4" thickness. Now, if you cut a 6" dia. (min.) pickle hole that will give ample room for the masseuse to get their hands right up to the massagies "base". So with 3"x 3" solid fir legs and 1" x 3" solid fir rails this table should be able to support a live load of 500 lbs and a static load of 800 lbs or more.I would be concerned with the thickness of the table material. The unpadded Ikea table looks like 1 thick", the Amazon thickness lookes like 5" thick.
If you decide on 3" thick with padding to support a 400 lb weight (never know when it needs to support the weight of two or three people), and some dude has a 5" pickle, that leaves just 2" to work with.
Hopefully once you get the prototype built and through "blowdown testing" you can make them available to other SPs. There is just something so absolutely kinky about this service, especially if viewing mirrors and/or a video feed is available to the client.The thickness of the table deck doesn't carry the weight. The legs and the rails carry the structural load. The thickness of the deck material is 3/4" fir plywood. Add 1" or so of dense foam and 1/2" of soft padding foam so your can wrap it over the edges and you have 2-1/4" thickness. Now, if you cut a 6" dia. (min.) pickle hole that will give ample room for the masseuse to get their hands right up to the massagies "base". So with 3"x 3" solid fir legs and 1" x 3" solid fir rails this table should be able to support a live load of 500 lbs and a static load of 800 lbs or more.
The rails for the slide out lounger seat for the masseuse also adds to the structural integrity of the table.
I will definitely be making them for anyone who wants one.Hopefully once you get the prototype built and through "blowdown testing" you can make them available to other SPs. There is just something so absolutely kinky about this service, especially if viewing mirrors and/or a video feed is available to the client.
Working on it. Need to finalize the slide out reclining chair.Is this thing in the works already? I have pretty much all the materials already from a bdsm furniture project. Id be happy to build one for anyone